EXTRACTOR HAMMER


 
 




 


 
 
The Holte extractor hammer is a pneumatic hammer. The outer sleeve of the extractor is a reciprocating weight that weighs 145 pounds. It cycles fast like a down hole hammer and has a 4-1/2" API thread at each end. With subs, it can be fastened to the top head driver or kelley of any rig. The sub on the bottom is fastened to the drill rod, casing or whatever you want to pull.

While the Extractor Hammer is hammering up, the operator can pull up or push down, twisting simultaneously if desired. Normally you need only to pull. The Extractor Hammer has a 4-1/2" regular pin on top and a 4-1/2" regular box on the bottom.

The price includes 2- subs of the following choices:

  • 3 1/2 API pin up or pin down
  • 2 7/8 IF pin up or pin down
with a 6" pulling plug.

Other accessories are threaded casing adapters and the heavy duty hinge that allows the casing or drill pipe to be pulled out away from the rig as the top head is lowered back down.

 


 
 
 
 

 


 

BREAKTHROUGH DRILLING TOOLS
P.O. Box 667,
 Timmins, Ontario, Canada.
P4N 7G2
Phone 705-267-6463             Fax 705-267-2915